SYNTHETIC CLP 680

  • Description
  • Application
  • PERFORMANCE LEVELS
  • TYPICAL PROPERTIES
  • HEALTH & SAFETY, ENVIRONMENT:

SYNTHETIC CLP 220 – fully synthetic, high performance EP/AW gear oil based on polyalphaolefins (PAO)

Synthetic CLP series are fully-synthetic gear and general lubricating oils with excellent thermal and ageing stability, very high viscosity index (shear-stable), out-standing low temperature characteristics, good cold flowing properties, very good air release, low foaming, good protection against micro pitting, good FE8 performance, zinc and silicone oil-free.

Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. SYNTHETIC CLP industrial gear oils series are fitted to all your industrial applications.

For the lubrication of bearings and gearboxes which are subject to high thermal loads. Suitable for lubricated-for-life applications and in gearboxes with extended drain intervals. Miscible and compatible with mineral oils. Excellent low temperature characteristics, high, shear-stable viscosity index.

Meets and exceeds:

SYNTHETIC CLP series of oils surpass the minimum requirements of CLP-HC gear oils according to DIN 51 517, Part 3 together with DIN 51 502, ISO 6743-6 and ISO 12925-1: CKC, CKD, CKE, AISE 224, David Brown S1.53.101.

PARAMETERS TEST UNIT     SYN CLP    
  METHOD                  
Product Name - - 68 100 150 220 320   460 680
                     
Density @ 15 °C ASTM kg/m3 848 851 853 854 860   861 862
D1298                  
                   
Flash point Cleveland ASTM D92 °C 240 250 250 260 260   300 300
                   
Kinematic viscosity @ 40 °C ASTM mm2/s 68 100 150 220 320   460 680
  D445                  
Kinematic viscosity @ 100 °C ASTM mm2/s 10,7 14,5 19,6 26,7 35,0   45,6 62,2
D445                  
                   
Viscosity Index ASTM - 147 150 150 155 155   155 160
  D2270                  
Pour point ASTM °C -56 -53 -45 -42 -42   -39 -33
D97                  

Prolonged and repeated contact with oil may cause skin disorders. Avoid contact. Wash immediately with soap and water. Do not discharge used oil in to drains or the environment. Dispose to an authorized used oil collection point. For further Information on Safety Guidelines please refer to MSDS available on our website.